During these challenging times, we guarantee we will work tirelessly to support you. We will continue to give you accurate and timely information throughout the crisis, and we will deliver on our mission — to help everyone in the world learn how to do anything — no matter what. Thank you to our community and to all of our readers who are working to aid others in this time of crisis, and to all of those who are making personal sacrifices for the good of their communities.
We will get through this together. Updated: January 30, Tech Tested. Type "cd" followed by a space in command prompt, but don't press "enter" yet. Type the name of the directory your filed is located in. Press "enter. Type "copy" followed by a space, but don't press "enter. Type your file's name followed by a space, but don't press "enter. Type in the name of the directory you want to copy the file to. Press "enter" to copy the file.
As the COVID situation develops, our hearts ache as we think about all the people around the world that are affected by the pandemic Read morebut we are also encouraged by the stories of our readers finding help through our site.
Article Edit. Learn why people trust wikiHow. This article was co-authored by our trained team of editors and researchers who validated it for accuracy and comprehensiveness. The wikiHow Tech Team also followed the article's instructions and validated that they work.
Learn more Explore this Article Preparing to Copy. Copying Individual Files. Copying a Folder's Contents.
How to Copy & Paste Files Using Command Prompt
Tips and Warnings. Related Articles.Keep in touch and stay productive with Teams and Officeeven when you're working remotely. Learn how to collaborate with Office Tech support scams are an industry-wide issue where scammers trick you into paying for unnecessary technical support services. You can help protect yourself from scammers by verifying that the contact is a Microsoft Agent or Microsoft Employee and that the phone number is an official Microsoft global customer service number.
I'm trying to use command prompt to copy over files from my hard drive from a computer stuck in a start up loop to a USB, so that I can do a clean windows install. However I keep on getting the error 'File Not Found'. I want to copy all files, folders and subfolders from my desktop onto my USB. This thread is locked.
You can follow the question or vote as helpful, but you cannot reply to this thread. Parsons's post on February 14, Instead of wildly guessing, you must identify your drive letters like so:. The drive that responds is your Windows system drive letter.
To identify the drive letter for your flash drive, you should place an easily identifiable file on it while working on a different machine, e.
You then locate its drive letter with a set of similar commands:. After you have completed these two tests you will know both the source and the drive letters.
This lets you compose the correct xcopy command. Did this solve your problem? Yes No.
Can I Copy and Rename a File in a Single Step?
Sorry this didn't help. You might want to use this event as an incentive to set up a robust backup scheme. The iron rule of data storage says that important data must at all times be stored on two separate media. The method you used would have failed if your hard disk had crashed.
April 14, Keep in touch and stay productive with Teams and Officeeven when you're working remotely. Site Feedback. Tell us about your experience with our site.Joinsubscribers and get a daily digest of news, geek trivia, and our feature articles. So how do you copy it anyway? Since XP, Windows has supported a technology called Volume Shadow Copy, which is used to power the previous versions feature in Vista as well as System Restore and backups.
What it does is take a temporary snapshot of the file or drive, and then allow an application to read from the snapshot even while other applications are accessing or modifying the file.
What we can do is use a command line utility called HoboCopy that utilizes this service to copy the file. The syntax is a little weird, because HoboCopy is really meant to be used for backing up an entire set of folders. We can use it to backup a single file by passing in the filename argument at the end.
Note: on Windows Vista you will need to launch an Administrator mode command prompt by right-clicking on the Command prompt in the start menu and choosing Run as Administrator. Backup started atcompleted at A much more useful task would be to backup my entire User folder, probably to an external hard drive for safekeeping. This command will likely take a very long time to complete, so you might want to take a nap or something.
Hobocopy also supports backing up files incrementally, so it will only copy the files that have changed since the last backup. This works similarly to utilities like rsync, except hobocopy stores the last backup date in a file that you need to specify on the command line.
This would be an excellent way to automatically backup a set of folders as part of a scheduled task. Download HoboCopy from sourceforge. The Best Tech Newsletter Anywhere. Joinsubscribers and get a daily digest of news, comics, trivia, reviews, and more. Windows Mac iPhone Android. Smarthome Office Security Linux. The Best Tech Newsletter Anywhere Joinsubscribers and get a daily digest of news, geek trivia, and our feature articles. Skip to content. How-To Geek is where you turn when you want experts to explain technology.
Since we launched inour articles have been read more than 1 billion times. Want to know more? This flag specifies the file that contains the last backup information.You have two ways in which you can copy a file — using the graphical method and the command-line method. In this particular article, we shall look at the command-line method using the cp command. Not just copying, you can perform a lot more with the cp command other than copying files and directories.
Let's get into details. B eing a Linux user, copying files and directories is one of the everyday tasks that you have to carry out. It can be copying a file to make a backup or copy it to another partition, directory, or external storage drive. With Unix systems and all Linux distributions, you have two ways in which you can copy a file — using the graphical method and the command-line method.
CP stands for Copy in Linux systems. The command generally takes two main arguments — the file to copy and the destination to paste the file.
Option one and two are copying a file to a directory or another destination, such as an external media storage or partition. It is a method you can use to make a backup of a file in a different name. The syntax is as follows:. From the above image, when we run the ls command, we see that we have a created a duplicate of the testFile with the name fileOne. Below is the syntax we shall use:. Copying multiple files into a directory. The previous command showed us how we could copy several files into a directory.
The method is efficient only for a relatively small number of files since it might be time-consuming.
Copy ALL files into a directory. It is an efficient method to copy multiple files to a directory. If the destination directory has a similar file to that in the source directory, it gives you a warning asking you whether to overwrite the file.
See the syntax below:. Copy Files Interactively with -i parameter. Copying files with the Verbose option. We can also use both verbose and interactive parameters in one command, as shown in the image below. Using both verbose and interactive method. Copying a directory recursively.How To Backup Data Without Booting Into Windows
Using the cp command, you can archive files and directories while copying them to the destination storage. We use the -a parameter. Archiving files using cp command. Suppose you always make copies of your files to another directory, you can make use of the -u parameter which only copies the newest files compared to those in the target destination.
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It only takes a minute to sign up. I have read about copying files with terminal but these examples will help me a lot. So here is what I want to do:. I want to copy a folder from home directory to sda3 and do not want to delete any thing on sda3 directory and opposite. Copying a file something. This will copy the untitelds. Ubuntu Community Ask! Sign up to join this community. The best answers are voted up and rise to the top.
Home Questions Tags Users Unanswered. How to copy files via terminal? Ask Question. Asked 7 years, 6 months ago. Active 3 years, 9 months ago. Viewed 1. Braiam Levan Levan 9, 22 22 gold badges 63 63 silver badges 89 89 bronze badges.
Active Oldest Votes. Honey 4 4 bronze badges. Evandro Silva Evandro Silva 7, 6 6 gold badges 30 30 silver badges 44 44 bronze badges. Neat syntax highlighting! Not sure how you triggered that. EvandroSilva I know. I was referring to the fact that some of your code is shown in blue. WarriorIng64 That is triggered by the bash tag in the question.
If you answer a question with bash tag, the hightlighting will follow bash style and so on. Anwar I was just partway through making a Meta post on this when I saw your comment. Of course, I credited you in the answer.
Subscribe to RSS
Rinzwind Rinzwind k 33 33 gold badges silver badges bronze badges. Use the cp command. Sparhawk 5, 7 7 gold badges 36 36 silver badges 69 69 bronze badges.For examples of how to use this command, see Examples. If a write operation cannot be verified an error message appears.
By default, you are prompted when you replace this setting, unless the copy command is executed in a batch script. You can substitute a device name for one or more occurrences of Source or Destination. If you do not specify a destination file, a copy is created with the same name, modified date, and modified time as the original file.
The new copy is stored in the current directory on the current drive. If the source file is on the current drive and in the current directory and you do not specify a different drive or directory for the destination file, the copy command stops and displays the following error message:. If you specify more than one file in Sourcecopy combines them all into a single file using the file name specified in Destination. Copy does not copy files that are 0 bytes long. Use xcopy to copy these files.
If you want to assign the current time and date to a file without modifying the file, use the following syntax:. The copy command, with different parameters, is available from the Recovery Console. To copy a file called Memo. To copy a file named Robin. If the Birds directory does not exist, the file Robin. To combine Mar When you combine files, copy marks the destination file with the current date and time.
If you omit Destinationthe files are combined and stored under the name of the first file in the list. For example, to combine all files in Report when a file named Report already exists, type:.
It only takes a minute to sign up. I need to move a file from location A to location B. Also if the folder for location B doesn't' exists I want to have it created. To check for existence of a directoryyou need to look for a 'pseudo-file' called "nul" - checking for existence of this file will always return true if the directory exists. The copy line copies the file called file in directory locationA to locationB and names the file the same thing.
If you want to rename the file at the same time, you can do that too:. If you want the ability to synchronise the copy and other advanced features ignore certain folders, only include certain wildcards then look at robocopy. Included in Vista and beyond, optional from resource kit tools in earlier versions. It is also more flexible and reliable. Creating scripts with robocopy will future-proof them.
Use robocopy to easily copy folders. The robocopy command replaces the xcopy command. It can quickly copy entire folders without having to worry about defining the contents.
This includes empty folders. It will create new directories if they don't exist at the target location. Mirror a directory. Mirroring a directory is great for making backups.
The mirror option of robocopy will copy all of the contents from the source to the destination. It will then delete anything at the destination that doesn't exist at the source. This ensures that your backup only has the latest versions of your files. Enable restarting. You may want to include the ability to restart the process in case the connection is severed mid-copy. Log the copying process.
This can help you pinpoint problems or generate an archive of what's been copied. For example. I'd also look at RoboCopy, but you need to get it from the resource kit as it's not in Windows until Vista. The above command creates an additional directory level with the name of the source file.
Sign up to join this community.
How to: Copy Network Shared Files Using Command Prompt
The best answers are voted up and rise to the top. Home Questions Tags Users Unanswered. What is the windows command line command to copy files? Ask Question. Asked 10 years, 11 months ago. Active 2 years ago. Viewed k times. What is the windows command prompt command to copy files?
I need this to be a command line so I can automate it. The version of Windows is XP.